Kellys Madman 50 27.5 ", model 2020, black-green
Fork: SR SUNTOUR XCT30 HLO, 27.5 ", 100mm, coil spring / Lockout
Head composition: semi-integrated
Center composition: cartridge (122mm)
Cranks: SHIMANO TY501 (42x34x24T) - length 170mm (XS - S), 175mm (M)
Gear: SHIMANO SL-M310 Rapidfire Plus
Number of gears: 3x8
Derailleur: SHIMANO TY700 (31.8mm)
Derailleur: SHIMANO Altus M370 (direct mount)
Cassette: SHIMANO CS-HG200-8 (12-32T)
Chain: KMC Z8 (108 articles)
Brakes: TEKTRO Hydraulic Disc
Wheels: front 160mm / rear 160mm
Brake levers: TEKTRO
Hubs: KLS Firework Disc (32 holes)
Rims: KLS Draft Disc 584x19 (32 holes)
Tip: steel
Tires : IMPAC Ridgepac 54-584 (27.5x2.10)
Stem: KLS Active - diam 28.6mm / bar bore 31.8mm / 8 ° / length 75mm (XS - M)
Handlebars: KLS Active RiseBar - diam 31.8mm / rise 18mm / width 620mm (XS), 660mm (S), 680mm (M)
Grips: KLS Advancer 2Density
Seatpost: KLS Active - diam 27.2mm / length 350mm (XS - S), 400mm (M)
Saddle: KLS Falcon
Pedals: alloy
Model year | 2020 |
Gears | 3x8 |
Groupset | Shimano Altus, Shimano Tourney |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 89619 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews