Kellys Gibon 50 29 bike, gray
Kellys Gibon 50 29 bike
Especially suitable for sports enthusiasts who like to spend time on wheels after work or over the weekend. Suitable for regular riding, from cycle paths, fields and forest roads to moderately demanding terrain. Usually fitted with components that are the golden middle when it comes to reliability and durability.
Frame |
KELLYS Dynamic Trail 29, tapered HT, internal routing, 12x148 mm Boost thru axle
|
Fork |
MARZOCCHI Bomber Z2 (29) Boost, 140 mm, Float / Rail / 15QR thru axle
|
Shifting |
SHIMANO SLX SL-M7100-IR Rapidfire Plus (I-Spec EV)
|
Derailleur |
Shimano Deore XT M8100 (direct mount)
|
Cassette |
Shimano CS-M6100-12 (10-51T)
|
Chain |
KMC X12 (114 links)
|
Cranks |
SHIMANO SLX M7100-1 Hollowtech II (32T) - length 175 mm
|
Brakes |
SHIMANO SLX M7100 Hydraulic Disc, 180 mm / 180 mm
|
Brake levers |
SHIMANO SLX BL-M7100
|
Rims |
KLS Valor 3 Disc 622x30 (32 holes)
|
Hubs |
SHIMANO MT400-B / Deore MT410-B Disc Center Lock (15x110 mm / 12x148 mm / 32 holes)
|
Spokes |
stainless steel black
|
Tires |
SCHWALBE Nobby Nic Evo Super Trail 29x2.35" Tubeless Easy, ADDIX Soft, folding
|
Seat post |
KS Rage-i Remote Telescopic - diam 30.9 mm / length 442 mm, stroke 150 mm
|
Saddle |
fi´zi:k Taiga S-alloy rails
|
Stem |
RACE FACE Aeffect R 35 - diam 28.6 mm / bar bore 35 mm / 0° / length 50 mm
|
Handlebars |
RACE FACE Ride 35 RiseBar - diam 35 mm / rise 20 mm / width 760 mm
|
Grips |
KLS Poison
|
Headset |
FSA 1.5 integrated
|
Bottom bracket |
Shimano BB52
|
Pedals |
KLS Flat - plastic platform
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x12 |
Groupset | Shimano XT, Shimano SLX, Shimano Deore |
Size | M, L |
Colour | grey |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 140 mm |
Telescopic seat post | yes |
product ID | 224356 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
