Haibike Seet 8 29 bicycle, black/white
Haibike Seet 8 29 bicycle
Frame |
aluminum 6061, quick release 5 x 135 mm, disc brakes, Post Mount
|
Fork |
Suntour XCM RL-DS Remote Lockout, Steel Spring, Travel: 100mm, Steel Post 1 1/8", Quick Release
|
Derailleur |
Shimano Altus M2000
|
Derailleur |
Shimano Alivio M312
|
Cassette |
Sunrace CSM90, 11-36 teeth
|
Chain |
KMC X9
|
Cranks |
Shimano MT1012, 22-36 teeth
|
Brakes |
Shimano MT200, 160 mm/160 mm, 2-piston disc brake
|
Brake levers |
Shimano MT200
|
Rim |
XLC X-630 D-WALL, hollow rim, aluminum
|
Front hub |
Shimano TX505
|
Rear hub |
Shimano TX505-8
|
Spokes |
black 2.0 mm, black
|
Tires |
P: Schwalbe Tough Tom, 57-622
From: Schwalbe Rapid Rob, 57-622 |
Seat post |
31.6 mm, aluminum
|
Saddle |
XLC MTB
|
Stem |
XLC Alu, A-head
|
Handlebars |
XLC Topflat 720 mm
|
Grips |
XLC MTB grips
|
Headset |
WTB No.10 ED 1-1 / 8" SEMI INTEGRATED, aluminum
|
Bottom bracket |
FP-B908L, BSA
|
Pedals |
plastic, anti-slip
|
Shifting |
Shimano Acera M3010
|
Model year | 2021 |
Gears | 2x9 |
Groupset | Other |
Size | M, L, XL |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
product ID | 119165 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews