Giant XTC Advanced 29er 0, model 2018
Advanced Composite frame, horizontal feet
FOX 32 Float SC Factory fork, 100 mm travel, FIT4 damping, handlebar lockout, Boost 15x110 mm thru-axle (KaBolt), OverDrive column
Handlebars Giant Contact SLR XC Flat, width 750 mm
Giant Contact SLR stem
Giant Contact SLR seat post, 27.2 mm, length 400 mm
Saddle Giant Contact SLR (Forward)
Shifting SRAM XX1 Eagle Gold, gears 1x12
Derailleur SRAM XX1 Eagle Gold, Type 2
Brakes SRAM Level Ultimate, discs [front] 180 mm, [rear] 160 mm
SRAM Level Ultimate brake levers
Cassette SRAM XX1 Eagle Gold, 10-50 teeth
SRAM XX1 Eagle Gold chain
SRAM XX1 Eagle Gold cranks, carbon cranks, 34 tooth derailleur
SRAM GXP PressFit middle compound
Rims Giant XCR 0 29" WheelSystem, carbon rims
Hubs Giant XCR 0 29" WheelSystem, Boost fixed axle 15x110 / 12x148 mm, XD nut on the rear hub
Giant XCR 0 29" WheelSystem Wires
Tires Maxxis IKON 3C EXO TR, 29x2.2, 120 TPI, tubeless
Model year | 2018 |
Gears | 1x12 |
Groupset | SRAM XX1, SRAM XX, SRAM GX |
product ID | 76256 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews