Giant Talon 3 GE, 2018 model
AluxX Aluminum frame
Fork SR Suntour XCM RL 27.5", stroke 100 mm, locking from the handlebars
Giant Connect Trail handlebars, width 730 mm
Giant Sport stem
Giant Sport seat post, 30.9 mm, length 375 mm
Giant Connect saddle (Upright)
Pedals MTB Caged, 9/16"
Shifting Shimano Altus (M3000), gears 3x9
Shimano Altus derailleur
Shimano Alivio derailleur
Brakes Shimano M315 (hydraulic), discs 160 mm
Brake levers Shimano M315
Cassette Shimano HG201- 9, 11-36 teeth
KMC X9 chain
Prowheel Burner-101P cranks, 42/34/24 tooth gears
Feimin FP-902W center composition
Rims Giant GX03V 27.5", 6061 Aluminum, double-walled, 21 mm inner width
Hubs Giant Tracker Sport
Stainless steel wires
Tires Schwalbe Smart Sam, 27.5x2.25 "
Model year | 2018 |
Gears | 3x9 |
Groupset | Shimano Alivio, Shimano Altus |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 76235 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews