Giant Talon 29er 1 GE, model 2018
AluxX Aluminum frame
Fork SR Suntour XCR 32 Air, RL-R 29", handlebar lockout, 100 mm
Handlebars Giant Connect Trail, width 730 mm
Giant Sport stem
Giant Sport seat post, 30.9 mm, length 375 mm
Giant Connect saddle (Upright)
Pedals MTB Caged, 9/16"
Shifting Shimano Deore, gears 3x10
Shimano Deore derailleur
Shimano Deore XT Shadow derailleur
Brakes Shimano M315 (hydraulic), discs 160 mm
Brake levers Shimano M315
Shimano HG50 cassette, 11-36 teeth
KMC X10 chain
Shimano MT500-3 cranks, gears 40/30/22 teeth
Shimano center composition
Rims Giant GX03V 29", 6061 Aluminum, double-walled, 21 mm inner width
Hubs Giant Tracker Sport
Stainless steel wires
Tires Schwalbe Smart Sam, 29x2.25 "
Model year | 2018 |
Gears | 3x10 |
Groupset | Shimano XT, Shimano Deore |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 76232 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews