Ghost Nirvana Universal - Midnight Black / Jet Black
At first glance, Nirvana attracts with its minimalist aluminum frame. The rider gets perfect geometry called SuperFit. Behind the geometry of SuperFit lies a carefully crafted algorithm based on the evaluation of tens of thousands of biometric data of variously high riders. The lengths of the frame tubes and their mutual angles are designed to create the ideal frame geometry for every height. The next step is the optimized key length, stem and handlebar width depending on the frame size. In the last phase, the rider can adjust the width of the seat and adjust the angle of the handlebars using eccentric grips by +/- 1 °.
This whole concept of a bicycle with an ideal frame geometry is complemented by an air fork with a stroke of 120 mm for sizes S-XL and a stroke of 100 mm for sizes XS. The wheel sizes are proportional to the frame sizes, which means that the XS-S frames have 27.5 "wheels and the M-XL frames have 29" wheels.
Whatever the height of the rider's figure, Nirvana fits everyone like a tailor-made shoe. All models with perfect equipment in attractive designs have a lot of small details - hubs in the Boost standard with fixed axles. Perfectly concealed but easily accessible cabling that runs under the protective cover of the lower frame tube and chain stay. It also serves as protection of the frame against flying stones.
Ghost Nirvana Tour - super strong, super light, super equipped. The perfect bike that guarantees enjoyment of every ride.
Category: MTB Hardtail
Wheel size: 29
Material: Aluminum
Year: 2021
Frame: NIRVANA AL
Fork: RockShox Recon RL
Derailleur: SRAM X01 Eagle 12-S
Cranks: TRUVATIV STYLO 6K EAGLE 32T
Middle composition: SRAM Powerspline 118/73
Cassette: SRAM PG Eagle 11-50T
Brakes: SRAM Level T 2/2 Piston 180 mm Disc
Gear: SRAM SX Eagle Trigger
Handlebars: Ground Fiftyone Dia. 31.8 mm 0/680 mm (XS) 0/700 mm (S) 20/720 mm (M) 27/740 mm (L) 40/760 mm (XL)
Grips: WTB Wafel Grips
Stem: Ground Fiftyone Dia. 31.8 mm
Seatpost: GHOST SP FG101 34.9 mm
Saddle: Selle Italia Adjustable
Front hub: Fastace DA201-F 15x110 mm
Rear hub: Fastace DA201-R 12x148 mm
Wheels: SRAM Centerline 180 mm
Front fork stroke: 120
Heel : FRHG0025
Rear rim: Rodi Tryp 584x25 (XS-S) 622x25 (M-XL) 32H
Front rim: Rodi Tryp 584x25 (XS-S) 622x25 (M-XL) 32H
Front tire: WTB Ranger 27.5x2.3 (XS-S) 29x2.3 (M-XL)
Rear tire: WTB Ranger 27.5x2.3 (XS-S) 29x2.3 (M-XL)
Number of gears: 1x12
Threads: DT Swiss 2.0
Brake levers: SRAM DB Level
Seat clamp: GW Seatclamp 38.0 mm
Model year | 2021 |
Gears | 1x12 |
Groupset | SRAM X01, SRAM SX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 122845 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews