Ghost Lector Advanced - Night Black / Jet Black
-17% Superior TEAM 29 ISSUE bike, gloss red carbon/chrome
3,749 €
-17%
RRP 4,499 €
GHOST LECTOR - the legend of the XC World Cups.
For GHOST, LECTOR has been its symbol since its inception. We place this legend at the top of the Ghost brand offer and we can hardly imagine a more ultimate racing bike.
The new generation of LECTOR reflects the requirements for a modern XC / marathon special that can handle the demanding world championship, where the tracks are becoming more and more demanding and rougher every year. The angle of the head tube (68 °) is 1.5 ° smaller than its predecessor and the total length of the frame at size M stretched by 62 mm. Wheels with boost hubs and the possibility of using wider tires - all this helps make it easier to drive through the most demanding sections and great stability and maneuverability. On the other hand, a short stem and a more upright seat allow the riders to breathe better even at maximum power and thus longer endurance in the saddle.
Another original and especially practical solution is the cabling, which is perfectly hidden, but easily accessible and leads under the protective cover of the lower frame tube and chain stay. Cover At the same time, it serves as a protection for the frame against flying stones.
The higher models have a fully integrated telescopic seatpost from the Austrian brand Eightpins, which impresses not only with its minimalist design, very low weight, but also with a certain stroke and the possibility of setting any stroke according to the rider's height.
Ghost Lector is an XC / marathon special for demanding and ambitious riders. The modern design of the carbon frame with perfect SuperFit geometry allows fast descents, efficiency on inclines and phenomenal acceleration and maximum power transmission.
Category: MTB Hardtail
Wheel size: 29 "
Material: carbon
Year: 2021
Frame: LECTOR LC
Fork: Fox 34 Float Performance SC Remote 100 mm (XS-M) 120 mm (L-XL)
Derailleur: Shimano XT RD-M8100 12-S
Cranks: Shimano XT FC-M8100 32T
Center composition: Shimano BB-MT800
Cassette: Shimano XT CS-M8100 10-51
Chain: Shimano CN-M8100
Brakes: Shimano SLX 2/2 Piston 180/160 mm Disc
Gear: Shimano XT SL-M8100
Handlebars: Syntace Vector Rise 5 mm Dia. 31.8 mm 700 mm (XS) 720 mm (S) 740 mm (ML) 760 mm (XL)
Grips: WTB Trail II
Introduction: Syntax Megaforce2 Dia. 31.8 mm
Seatpost : Eightpins mechanical 34.9 mm
Saddle: Selle Italia SLS
Wheels: Shimano SM-RT54 180/160 mm
Front fork stroke: 120
Heel : FRHG0025
Front tire: Maxxis Ikon 3C MaxxSpeed Exo 29x2.35
Rear tire: Maxxis Ikon 3C MaxxSpeed Exo 29x2.35
Number of gears: 1x12
Front entwined wheel: Rodi Wheelset 15x110 mm
Rear tangled wheel: Rodi Wheelset 12x148 mm
Brake levers: Shimano BL-M7100
Carbon frame
Lightweight, stiff and at the same time still flexible material that absorbs shocks well and increases comfort. A higher price is to be expected.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
| Model year | 2021 |
| Gears | 1x12 |
| Groupset | Shimano XT, Shimano SLX |
| Material | carbon fiber |
| Brakes | Hydraulic disc brakes |
| product ID | 120331 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Sale -21% Leatt HydraDri 5.0 ProClip cycling shoes, black
from 142 €
-21%
RRP 199 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
