Ghost Lector 9.9 UC red / black, test model 2018
Used model driven within our MTBIKER team (approx. 6700 km). The bicycle underwent an exchange of components (chain, cable + bowden). There are minor flaws of riding beauty on the frame, but the whole time it was / is treated with protective foils. Bike is available to try in the MTBIKER center.
Type: Hardtail
Material: UC ultralight carbon
Wheel size: 29
Fork: Rock Shox SID RL Solo Air 100mm Oneloc
Derailleur: SRAM X01 Eagle 12-S
Converter: ONE UP SWITCH - SRAM DM 34z. oval + original Eagle X-Sync 32z.
Brakes: SRAM Level TL 2/2 Piston 180 / 160mm Disc
Front tire: Schwalbe Rocket Ron Addix SpeedGrip 29x2.25
Rear tire: Maxxis Ikon 29x2,20 "EXO TR kevlar
Wheels: DT Swiss XR 1501 Spline 25mm Wheelset 15x110mm, 12x148mm SRAM XD, tubeless design
Front hub: 15x110mm
Rear hub: 12x148mm SRAM XD
Frame: LECTOR UC
Gear: SRAM X01 Eagle
Cranks: Truvativ Descendant Carbon Eagle
Cassette: SRAM XG 1295 10-50
Chain: Sram Eagle GX 12sp. (+ 1x spare)
Handlebars: Syntace Vector Carbon 740mm, rise 5mm, 31.8mm
Grips: Esi grips Chunky CLASSIC, 60g red (+ original grips)
Stem: Syntace Force 109, 31.8mm
Seatpost: Syntace P6 Carbon 31.6mm
Saddle: Fizik Antares R7
Number of speeds: 12
Front stroke: 100mm
Heel: FRHG0002
Weight: 9.7kg
Size:: XL
Model year | 2018 |
Gears | 1x12 |
Groupset | SRAM X01, SRAM GX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 43738 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews