Ghost Lector 2.9 LC GREEN / BLACK, model 2018
Wheel size: 29
Fork: Rock Shox Recon Gold RL Solo Air 100mm Oneloc
Derailleur: Shimano Deore RD-M6000 Shadow Plus 10-S
Converter: Shimano Deore FC-M6000 Hollowtech II 34-24
Brakes: Shimano BR-M365 2/2 Piston 180/160 mm Disc
Front tire: Continental X-King PureGrip 29x2.2
Rear tire: Continental X-King PureGrip 29x2.2
Wheels: Rodi Tryp 622x21mm, 15x100mm, 12x142mm
Front hub: Formula DC-71 15x100mm
Rear hub: Formula DHT-142 12x142mm
Frame: LECTOR LC
Gear: Shimano Deore SL-M6000
Cranks: Shimano Deore FC-M6000 Hollowtech II 34-24
Cassette: Shimano CS-HG500-10 11-42
Handlebars: Ground Fiftyone 740mm, 31.8mm
Stem: Ground Fiftyone 31.8mm
Seatpost: Ground Fiftyone 31.6mm
Saddle: Fizik Antares R7
Number of speeds: 20
Front stroke: 100mm
Heel: FRHG0022
Model year | 2018 |
Gears | 2x10 |
Groupset | Shimano Deore |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 43724 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews