GHOST Lanao Base 27.5 women's bike, pearl mint/pearl purple gloss
Choose personal collection at the store and decide on the spot.
Ghost Lanao Base 27.5 women's bike
The Ghost Lanao women's model is a fast, versatile hardtail with sporty geometry and 27.5" wheels. It is suitable for cycle routes, but it can also handle difficult climbs in the terrain. The lightweight aluminum frame is equipped with an SR Suntour XCE28 DS suspension fork with 100 mm of travel, reliable hydraulic brakes, cabling routed inside the frame and extremely low-maintenance components. The frame is ready to mount mudguards, carrier or stand.A universal means of transport for those who do not take cycling too seriously and are looking for an alternative means of transport at an affordable price. That usually means a compromise of heavier weight and only basic component equipment.
Frame |
LANAO AL
|
Fork |
SR Suntour XCE28 DS 100 mm
|
Derailleur |
Shimano Tourney RD-TY300, 7-speed
|
Derailleur |
Shimano Tourney FD-TY300
|
Cassette |
Shimano CS-HG-200, 7-speed, 12-32T
|
Chain |
KMC Z51
|
Cranks |
Shimano FC-TY301 42-34-24
|
Brakes |
Shimano BR-MT200 160 mm Disc / Shimano SM-RT10 160 mm
|
Brake levers |
Shimano BL-MT200
|
Rims |
Schürmann Yak Disc 25 / Schürmann Yak Disc 25
|
Hubs |
Shimano HB-TX505 QR 100 mm / Shimano FH-TX505 QR 135 mm
|
Tires |
Mitas Ocelot 27x2.10
|
Seat post |
GHOST SP DC1, Ø 31.6 mm
|
Saddle |
Selle Italia X-Base
|
Stem |
Ground Fiftyone, Ø 31.8 mm
|
Handlebars |
Ground Fiftyone, Ø 31.8 mm, 0/700 mm (XS), 0/720 mm (S), 0/740 mm (M)
|
Grips |
MTB Grip
|
Headset |
14106
|
Bottom bracket |
BB-Thun
|
Pedals |
FPD NW-91K
|
Sex | Women |
Model year | 2022 |
Gears | 3x7 |
Groupset | Shimano Tourney |
Colour | pearl mint/pearl purple gloss |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 27.5" |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 141490 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
