GHOST KATO Universal 29 bike, green pearl/azur blue metallic
Choose personal collection at the store and decide on the spot.
Ghost KATO Universal 29 bicycle
The model GHOST Kato Universal is a fast, versatile hardtail with a sporty geometry, which is suitable for cycle routes but can also handle difficult climbs in the terrain. The light aluminium frame is fitted with a Rock Shox Judy TK suspension fork with 100 mm travel, reliable TEKTRO hydraulic brakes, SHIMANO components with 3x9 gears, internalcabling and Czech MITAS tires. The frame is ready to mount mudguards, carrier or kickstand.Suitable not only for commuting, but also for weekend trips outside the city. You can ride on cycle paths, unpaved roads and in easy terrain. If you ride more demanding terrain or more frequently, you will need to fine-tune more often.
Frame |
KATO AL
|
Fork |
Rock Shox Judy TK R 100 mm
|
Shifting |
Shimano Alivio SL-M3100
|
Derailleur |
Shimano Alivio RD-M3100 9-S
|
Derailleur |
Shimano Altus FD-M370
|
Cassette |
Shimano CS-HG-200-9 11-36
|
Chain |
KMC X9
|
Cranks |
Shimano FC-MT101 44-32-22
|
Brakes |
Tektro HD-M275 180 mm / Tektro TR180-35
|
Brake levers |
Tektro HD-M275
|
Rims |
Rodi Excalibur XC 19 / Rodi Excalibur XC 19
|
Hubs |
Shimano HB-TX505 QR 100 mm / Shimano FH-TX505 QR 135 mm
|
Front tire |
Mitas Ocelot 29x2.35
|
Rear tire |
Mitas Ocelot 29x2.35
|
Seat post |
GHOST SP DC1 31.6 mm
|
Saddle |
Selle Italia X-Base
|
Stem |
Ground Fiftyone Dia. 31.8 mm
|
Handlebars |
Ground Fiftyone Dia. 31.8 mm 0/700 mm (XS) 0/720 mm (S) 0/740 mm (M-L) 0/760 (XL)
|
Grips |
MTB Grip
|
Headset |
14106
|
Bottom bracket |
BB-Thun
|
Pedals |
FPD NW-91K
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 3x9 |
Groupset | Shimano Alivio, Shimano Altus |
Size | S (155-170 cm), M (165-180 cm), L (175-190 cm), XL (185-200 cm) |
Colour | green pearl/azur blue metallic |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 141479 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
