GHOST KATO Advanced 29 bike, light grey/dark orange
Choose personal collection at the store and decide on the spot.
Ghost KATO Advanced 29 bike
The GHOST Kato Advanced model is a fast, versatile hardtail with a sporty geometry , which is suitable for cycle routes , but can also handle challenging off-road climbs . The lightweight aluminum frame is fitted with a SR Suntour XCR suspension fork with 100 mm travel , reliable hydraulic brakes, SHIMANO Deore components with 2x10 gears, cabling routed inside the frame and SCHWALBE Smart Sam tires. The frame is ready to mount mudguards, a carrier or a stand.Especially suitable for sports enthusiasts who like to spend time on wheels after work or over the weekend. Suitable for regular riding, from cycle paths, fields and forest roads to moderately demanding terrain. Usually fitted with components that are the golden middle when it comes to reliability and durability.
Frame |
KATO AL
|
Fork |
SR Suntour XCR RL-R AIR 100 mm
|
Derailleur |
microSHIFT Advent X RD 10s
|
Cassette |
MicroSHIFT Advent X CS-H104 11-48
|
Chain |
KMC 10-Speed
|
Cranks |
Miranda Crankset Lambda 1R ZETA CF 3D Chainguard
|
Brakes |
Tektro HD-M275 180 mm / Tektro TR180-35
|
Rims |
Rodi Excalibur XC 19 / Rodi Excalibur XC 19
|
Tires |
Schwalbe Smart Sam 29x2.25
|
Seatpost |
GHOST SP DC1 31.6 mm
|
Saddle |
Selle Italia X-Base
|
Stem |
Ground Fiftyone Dia. 31.8 mm
|
Handlebars |
Ground Fiftyone Dia. 31.8 mm 0/700 mm (XS) 0/720 mm (S) 0/740 mm (M-L) 0/760 (XL)
|
Grips |
MTB Grip
|
Headset |
14106
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 2x10 |
Groupset | microSHIFT ADVENT X |
Size | S, M, L ,XL |
Colour | light grey/dark orange |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 141456 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
