Ghost Kato 9.9 AL, model 2019
KATO AL frame
Fork: Rock Shox 30 Silver Poploc 100 mm
Derailleur: Shimano XT FD-M8025
Derailleur: Shimano XT RD-M8000 11-S
Gear: Shimano XT SL-M8000
Front brake: Shimano XT BR-M8000 2/2 Piston 180 mm Disc
Rear brake: Shimano XT BR-M8000 2/2 Piston 180 mm Disc
Cranks: Shimano XT FC-M8000 36-26
Cassette: Shimano SLX CS-M7000 11-42
Handlebars: GHOST Low Rizer MTB 720 mm Rise 10 mm Dia. 31.8 mm
Stem: GHOST MTB Dia. 31.8 mm
Seatpost: GHOST Light DC 1 31.6 mm
Saddle: Selle Italia X-Base
Front hub: Shimano HB-M7000 QR
Rear hub: Shimano FH-M7000 QR
Rims: Rodi Blackrock 622x21 mm 32H
Wheels: Rodi Viper Wheelset 507 x 21mm QR
Front tire: Continental X-King 2.2
Rear tire: Continental X-King 2.2
Number of speeds: 22
Model year | 2019 |
Gears | 2x11 |
Groupset | Shimano XT, Shimano SLX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 63513 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews