GHOST KATO 1 29 bicycle, black/white
GHOST KATO 1 29 bicycle
Frame |
KATO 29 Alloy AL
|
Fork |
RST Blaze MLO 100 mm
|
Shifting |
Shimano SL-M310
|
Derailleur |
Shimano Tourney TX 8-Speed
|
Derailleur |
Shimano Tourney
|
Cassette |
Shimano CS-HG200 12-32
|
Cranks |
Shimano FC-TY 501 42-34-24
|
Brakes |
Tektro ACC 003 160 mm
|
Saddle |
GHOST VL 1353
|
Stem |
GHOST AS GH2 31.8 mm
|
Handlebars |
GHOST Low Rizer 720 mm 31.8 mm
|
Sex | Men, Unisex |
Model year | 2017 |
Gears | 3x8 |
Colour | black |
Material | aluminium |
Wheel material | Aluminium |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Telescopic seat post | no |
product ID | 30484 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
