FORCE Epigoni 29" Alivio, black and white
Fork: SR SUNTOUR XCR-LO 29", 1 1/8"
Central composition: FORCE NINE 3.3+, 40/30/22 teeth, 175 mm
Derailleur: SHIMANO ALIVIO RDM4000 SGS
Derailleur: SHIMANO ALIVIO FDM4000
Shifting: SHIMANO ALIVIO SLM4000
Cassette: SHIMANO DEORE HG400, 11-34 teeth
Chain: SHIMANO CNHG53
Brakes: SHIMANO M425, hydraulic, 160 / 160 mm
Brake levers: SHIMANO M425, hydraulic
Rims: FORCE BASIC DISC, 32 holes
Cartridges: FORCE 6D-62/72
Tires: MITAS OCELOT V85, 29x2.10"
Pedals: FORCE 610 ALU, ball bearings
Handlebars: FORCE BASIC H6.6, straight, 31.8 / 680 mm
Stem: FORCE BASIC S4.6, 31.8 / 100 mm
Head composition: FORCE 1 1/8", semi-integrated
Saddle: FORCE RIDER GEL TECH
Seat post: FORCE BASIC P4.2, 31.6 / 400 mm
Model year | 2020 |
Gears | 3x9 |
Groupset | Shimano Deore, Shimano Alivio |
Material | aluminium |
Wheel material | Aluminium |
Brakes | Hydraulic disc brakes |
Fork | Spring |
product ID | 87281 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews