DEMA ENERGY 7 29 bicycle, sand yellow/brown
DEMA ENERGY 7 29 bike
Suitable not only for commuting, but also for weekend trips outside the city. You can ride on cycle paths, unpaved roads and in easy terrain. If you ride more demanding terrain or more frequently, you will need to fine-tune more often.
Frame |
DEMA Energy DB Alloy
|
Fork |
SR SUNTOUR XCR-AIR RLR DS 29" travel 100 mm
|
Shifting |
Shimano Alivio M3100 2x9spd
|
Derailleur |
Shimano Alivio M3100-SGS
|
Derailleur |
Shimano M2020 2x9 speed TOP SWING
|
Cassette |
Shimano HG200 9spd 11-36T
|
Chain |
KMC X9 9spd
|
Cranks |
Shimano FC-MT101 36-22T
|
Brakes |
Shimano MT200 Hydraulic Disc
|
Rims |
ORIN GA18 DISC 622x21 mm
|
Hubs |
Shimano TX505 QR
|
Tires |
Extend Avenger 29x2.125"
|
Seat post |
Extend ELITE II 31.6 mm
|
Saddle |
Extend Speed Way Flow
|
Stem |
Extend 70 mm -10°
|
Handlebars |
Extend A6045BT Flat 700 mm
|
Grips |
Shimano DD00B 120 mm
|
Headset |
Extend H863J Semi-integrated 28.6/44/30 mm
|
Bottom bracket |
Extend B902 BSA 68x121 mm
|
Pedals |
Extend FLAT PP
|
Sex | Men, Unisex |
Model year | unspecified |
Gears | 2x9 |
Groupset | Shimano Alivio |
Colour | sand yellow/brown |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Spring |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 327401 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews