Cyclision Corph 2 MK-II 27.5 bicycle, acid gray














Cyclision Corph 2 MK-II 27.5 bicycle
Frame |
Cyclision one, Alutec, Tapered, Boost, Weight 2200 g
|
Fork |
SR SUNTOUR XCR RLR, 120 mm, Air, Remote speed Lockout
|
Shifting |
SHIMANO DEORE 12s, SL-M6100-R, Rapidfire Plus
|
Derailleur |
SHIMANO DEORE 12s RD-M6100
|
Cassette |
SHIMANO DEORE 12s, CS-M6100-12, 12-SPEED, 10-51T
|
Cranks |
SHIMANO DEORE 12s, FC-MT510-1, 34T, 175 mm
|
Brakes |
SHIMANO, BR-MT200
|
Hubs |
SHIMANO, FH-MT410-B 12s, 32 Holes, Center Lock
|
Tires |
MAXXIS, Crossmax M309P
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x12 |
Groupset | Shimano Deore |
Size | S |
Colour | acid gray |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 27.5" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 120 mm |
Telescopic seat post | no |
product ID | 208457 |

Zodin

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews