Corratec X-vert Motion 27.5, mountain bike, model 2017
Fork: Corratec HL AMS, Suspension travel: 100mm
Brakes: Tektro HD-M285front, Brake size disc: 180 mm
Stem: ZZYZX 6 Series 3D Forged, Material: Alloy
Handlebars: ZZYZX 6 Series SC 720mm, Material: Alloy
Seat: Corratec Steel Rail, Material: Black / Viper Green
Seatpost : ZZYZX Twin Bolt 30.9, Outer diameter: 30.9mm
Converter: Shimano FC-M351, Number of chainrings; Ratio: 3s; 44/32/22
Cassette: Shimano HG31 8s, Number of pinions; Ratio: 9s; 12-14-16-18-21-24-28-32-36
Derailleur: Shimano Altus 3x9
Derailleur: Shimano Acera 9s
Gear: Shimano Altus
Rims: Mach1 ER-20 Disc, Rim height: 19mm, Rim outer diameter: 27.50zoll, Width outside: 24mm, Number of spokes: 32, Type of tires: Wire strip (with hose)
Material: aluminum
Tires: Michelin Country Griper 2.1, Inside diameter: 27.50zoll, Width: 54mm, Type of tires: Wire stripes (with hose)
Converter gears: 3s; 44/32/22
Cartridge gears: 9s; 12-14-16-18-21-24-28-32-36
Fork stroke: 100 mm
Brake Disc Size: 180 mm front160 mm rear
Model year | 2017 |
Gears | 3x9 |
Groupset | Shimano Acera, Shimano Altus |
Material | aluminium |
product ID | 45291 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews