Corratec X Vert 650B MOTION 2018
The perfect bike for any MTB ride.
Very good geometry and super 29 "or 650b wheels guarantee comfort throughout the ride.
You will have really fun with this bike.
Frame: Corratec X Vert 650B Motion Material: alloy 6061
Fork: Corratec HL 525D AMS 100mm Suspension travel: 100mm
Brakes: Tektro HD-M285frontSize brake disc: 180 mm
Stem: ZZYZX 6 Series 3D Forged Material: Alloy
Handlebars: ZZYZX 6 Series SC 720mm Material: Alloy
Seat: Corratec Sport Saddle
Seatpost: ZZYZX Twin Bolt 30.9 Material: Alloy
Converter: Shimano M-351 44/32/22 Number of chainrings; Ratio: 3s; 44/32/22
Cassette: Shimano HG400 9s Number of pinions; Ratio: 9s; 12-14-16-18-21-24-28-32-36Material: Alloy
Derailleur: Shimano ALTUS
Derailleur: Shimano Acera 9s
Gear: Shimano ALTUS
Rims: Mach1 ER-20 Disc 27.5erRim outer diameter: 27.50zollNumber of spokes: 32Type of tires: clincher with tubes
Tires: Michelin Country Griper 2.1Inside diameter: 27.50zollWidth: 54mmType of tires: clincher with tubes
Converter gears: 3s; 44/32/22
Cartridge gears: 9s; 12-14-16-18-21-24-28-32-36
Fork stroke: 100 mm
Brake Disc Size: 180 mm front160 mm rear
Model year | 2018 |
Gears | 3x9 |
Groupset | Shimano Acera, Shimano Altus |
product ID | 52537 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews