Corratec X Vert 29 ELITE
The X-Vert Elite is the perfect mountain bike with a solid rear structure for every ride. Balanced geometry and 29-inch wheels provide high comfort. This bike is the perfect companion for those looking for maximum fun on and off the road. Shimano Deor's proven gearing
Frame: Corratec X Vert Material: Alloy 6061 PG
Fork: Rockshox CX 30 TK Suspension travel: 100mmMaterial: Alloy
Brakes: Tektro HDM275frontSize brake disc: 180 mm
Stem: ZZYZX SL Alloy Stem Material: Alloy
Handlebars: ZZYZX SL Alloy Handlebar Material: Alloy
Seat: ZZYZX SL Race Material: Alloy
Seatpost: ZZYZX SL Alloy Material: Alloy
Converter: Shimano MT500 Number of chainrings; Ratio: 2s; 36/26
Cassette: Falcon CS-1042 Number of pinions; Ratio: 10s; 11-13-15-18-21-24-28-32-37-42
Derailleur: Shimano DEORE
Derailleur: Shimano DEORE XT 10s
Gear: Shimano DEORE
Rims: ZZYZX Cross Attack 29Rim outer diameter: 29.00zollNumber of spokes: 32Type of tires: clincher with tubes
Tires: Continental Race KingInside diameter: 29.00zollWidth: 55mmType of tires: clincher
Converter gears: 2s; 36/26
Cassette gears: 10s; 11-13-15-18-21-24-28-32-37-42
Fork stroke: 100 mm
Brake Disc Size: 180 mm front180 mm rear
Gears | 2x10 |
Groupset | Shimano XT, Shimano Deore |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 73843 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews