Corratec Revolution 29 Base
Not just a usually fast bike, but super fast! The extremely light carbon frame and sporty geometry guarantee maximum driving pleasure.
Frame: Corratec Revolution 29 Material: Carbon UD 700T
Fork: Manitou Marvel Comp TS Air Suspension travel: 100mm
Brakes: Shimano M315frontSize brake disc: 180 mm
Stem: ZZYZX 6 Series 3D 6 Degree Material: Alloy
Handlebars: ZZYZX 6 Series XC 720mm Material: Alloy
Seat: Corratec Cro Mo Rail Material: Black / Neon Yellow / White
Seatpost: ZZYZX Twin Bolt 27.2mm Outer diameter: 27.2mmMaterial: Alloy
Converter: Rotor REX 4.2 Number of chainrings; Ratio: 2s; 36/26
Cassette: Falcon 1140 11s Number of pinions; Ratio: 11s; 11-13-15-17-19-21-24-27-31-35-40
Derailleur: Shimano XT 2x11
Derailleur: Shimano XT 11s
Gear: Shimano SLX
Rims: Mavic Cross Ride 29erRim height: 21mmRim outer diameter: 29.00zollWidth outside: 26mmNumber of spokes: 24Type of tires: clincher with tubesMaterial: Alloy
Tires: Continental Race King 2.2Inside diameter: 29.00zollWidth: 55mmType of tires: clincher with tubes
Converter gears: 2s; 36/26
Cassette gears: 11s; 11-13-15-17-19-21-24-27-31-35-40
Fork stroke: 100 mm
Brake Disc Size: 180 mm front160 mm rear
Gears | 2x11 |
Groupset | Shimano XT, Shimano SLX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 62030 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews