Cannondale F29 Carbon 4 mountain bike, model 2015 Replica
The F29 is a hardtail designed for performance riders who like speed. The carbon frame weighing only 1200 g uses high proportions of solid Ballistec fibers. These special fibers come from the armaments industry, where they are used for armor. These fibers bring high lateral stiffness and flexibility. Using a short rear structure, a steeper head tube angle with a lower center, the F29 is excellently manoeuvrable. The Cannondale Lefty fork has unrivaled rigidity and low weight. Together with the precise and reliable 2x10 transmission, you will drive the F29 at full throttle.
Frame- F29, Ballistec Carbon, SPEED SAVE, BB30, 1.5 Si head tube
Forks - Lefty PBR 100 29, PBR XC damper, Hybrid Needle Bearing Technology, 45mm offset
Rafíky- Stan's ZTR Rapid 29, 32 sticks, tubeless ready
Hubs- Lefty SL front, Formula DC-22 rear
Top- DT Swiss Competition
Tires- Schwalbe Racing Ralph Performance 29x2.1 ", tubeless ready
Cranks- Shimano Deore Hollowtech II, 38/24
Middle composition- FSA MegaExo w / BB30 adapter
Chain- KMC X10, 10-speed
Cassette- SRAM PG 1030, 11-36, 10-speed
Derailleur - Shimano Deore, 31.8 clamp
Derailleur - Shimano SLX, Shadow Plus
Gear levers- Shimano SLX w / I-Spec
Handlebars- Cannondale C3 flat, 6061 double-butted alloy, 700mm
Grips- Cannondale Locking Grips
Stem- Cannondale C3, 1.5 ", 31.8, -5 deg.
Head Composition - Cannondale HeadShok Si
Brakes - Shimano Deore, 180 / 160mm
Brake levers - Shimano Deore, 180 / 160mm
Seat- prologue Nago Evo X8 STN
Seatpost- Cannondale C3, 27.2x350MM (S, M) 400mm (L, X)
Sizes- S, M, L, X
Colors- Jet Black, w / Charcoal Gray and Fine Silver Accents, Matte (CRB), Team Replica, Gloss (REP)
Model year | 2015 |
Material | carbon fiber |
product ID | 7390 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews