DEMA Pegas 1 bicycle, orange/dark grey
DEMA Pegas 1 bicycle
A universal means of transport for those who do not take cycling too seriously and are looking for an alternative means of transport at an affordable price. That usually means a compromise of heavier weight and only basic component equipment.
Frame |
Demo Pegas Performance V-Brake Alloy
|
Fork |
SR Suntour XCE28 P, 100 mm
|
Shifting |
Shimano Tourney
|
Derailleur |
SunRace RD-M41 8-speed
|
Derailleur |
SunRace FD-M300
|
Cassette |
Shimano HG200 8-speed 12-32T
|
Chain |
KMC Z7 8-speed
|
Cranks |
Extend Triple 42/34/24T 170 mm
|
Brakes |
Extend V-Brake alloy
|
Rims |
Orin 584x21 V-Brake
|
Hubs |
Extend, 32H
|
Tires |
Extend Terrac 27.5 x 2.1"
|
Seat post |
Extend ELITE II 27.2x350 mm
|
Saddle |
Extend STRACE
|
Stem |
Extend MD6036 25.4 mm, 75 mm
|
Handlebars |
Extend Riser Alloy 660 mm
|
Grips |
Shimano DD-00B 120 mm
|
Headset |
Extend Semiintegrated 28.6/44/30 mm
|
Bottom bracket |
Extend B902 BSA 68x122.5 mm
|
Pedals |
Extend FLAT PP
|
Sex | Women |
Model year | unspecified |
Gears | 3x8 |
Groupset | Shimano Tourney |
Colour | orange |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 27.5" |
Brakes | V-brakes |
Fork | Spring |
Fork travel | 100 mm |
Telescopic seat post | no |
product ID | 318852 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews