DEMA Modet Ecco 26 bicycle, black/grey, S
DEMA Modet Ecco 26 bicycle
A universal means of transport for those who do not take cycling too seriously and are looking for an alternative means of transport at an affordable price. That usually means a compromise of heavier weight and only basic component equipment.
Frame |
DEMA Sport Hi-Ten
|
Fork |
Hi-Ten Rigid fork
|
Shifting |
Shimano SL-RS36 3x6 Speed
|
Derailleur |
Shimano RD-TZ500 GSB
|
Derailleur |
Shimano TZ30
|
Chain |
KMC Z51
|
Cranks |
Extend Performance Black 42x32x24T
|
Brakes |
Extend V-Brake
|
Rims |
ORIN 559x19, 32H
|
Hubs |
JOYTECH 433/434, 32H
|
Tires |
Freedom Dual 26x2.1"
|
Seat post |
Extend Performance ST-200, 25.4x350 mm
|
Saddle |
Extend
|
Stem |
Extend Performance steel MTS-309-5
|
Handlebars |
Extend Performance Steel Riser 660 mm
|
Grips |
Shimano RevoShift DC 90 mm
|
Headset |
XR-Z301
|
Bottom bracket |
FSA BB-7420ST JIS, 124.5 mm
|
Pedals |
FP-906
|
Freewheel |
Shimano TZ20-6 14-28T
|
Sex | Men, Unisex |
Model year | unspecified |
Gears | 3x6 |
Groupset | Shimano RevoShift |
Colour | black |
Material | steel |
Wheel material | Aluminium |
Wheel diameter | 26" |
Brakes | V-brakes |
Fork | Rigid |
Telescopic seat post | no |
product ID | 318827 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews