Lapierre Edge 127, model 2019
Material: Aluminum
Year: 2019
Wheel size: 27.5 "
Type: hardtaily
Frame: EDGE 27.5 "SUPREME 4 ALLOY V-BRAKE
Fork: SUNTOUR XCE-P-27.5 "80 mm travel
Derailleur: SHIMANO TX RDTX800 8-Speed
Cranks: SHIMANO FCTY301 42 × 34 × 24 170 mm (XS, S) / 175 mm (M, L, XL)
Center composition: SQUARE CH 52 127 mm
Cassette: SHIMANO HG200 8s 12x32T
Chain: S8 1 / 2x3 / 32 "8-SPEED
Brakes: ALONGHA V-BRAKE
Gear: SHIMANO ALTUS STEF500 3x8-SPEED
Head composition: FSA NO. 10 WS 50/44 1.6 TOP CAP
Handlebars: Lapierre 6061 ALLOY W: 720 mm W: 15 mm Ø: 31.8 mm
Grips: VELO DOUBLE DENSITY BLACK
Stem: Lapierre ALLOY 7 ° Ø: 31.8 mm L: 60 mm (XS, S, M, L) / 75 mm (XL)
Seatpost: Lapierre ALLOY Ø: 27.2 mm L: 350 mm
Saddle: SELLE ROYAL SHADOW
Front hub: FORMULA FM21 32H
Rear hub: FORMULA FM32 32H
Rims: ALLOY DOUBLE WALL 27.5 × 19C
Tires: 27.5 × 2.10 MICHELIN COUNTRY RACE'R
Pedals: NW 91K steel cage
Accessories: TUBELESS TAPE + VALVES
Derailleur: Shimano Tourney FDTY500
Front stroke: 80 mm
Stroke: 60 - 90 mm
Model year | 2019 |
Gears | 3x8 |
Groupset | Shimano Altus, Shimano Tourney |
Material | aluminium |
Brakes | V-brakes |
product ID | 64155 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews