Kellys SOOT 90 28 bike, black
Kellys SOOT 90 28 bicycle
Suitable for enthusiasts who like to discover their neighborhood and more distant locations from the seat of their bicycle. The components have sufficient durability and can handle regular rides and training on light terrain, paved and unpaved roads.
Frame |
KELLYS Gravel Concept Carbon Disc / tapered HT, flat mount, internal routing / 12 mm thru axle
|
Fork |
KELLYS Carbon Disc, 1.5 tapered steerer / flat mount disc brake / 12 mm thru axle
|
Shifting |
SHIMANO GRX BL-RX600 / ST-RX600 Dual Control
|
Derailleur |
SHIMANO GRX RX812 (direct mount)
|
Cassette |
SUNRACE CSMS7 (11-42T)
|
Cranks |
SHIMANO GRX RX600-1 (40T) - length 172.5 mm (S - M), 175 mm (L)
|
Brakes |
SHIMANO GRX RX400 Hydraulic Disc
|
Brake levers |
SHIMANO GRX BL-RX600 / ST-RX600 Dual Control
|
Brake discs |
front 160 mm / rear 160 mm
|
Rims |
DT SWISS G 540 Disc 700Cx24 (32 holes)
|
Hubs |
NOVATEC Disc (32 holes)
|
Spokes |
stainless steel black
|
Tires |
SCHWALBE G-One Allround 40-622 (700x38C) RaceGuard, folding
|
Stem |
KLS Active Road - diam 28.6 mm / bar bore 31.8 mm / 6° / length 70 mm (S), 90 mm (M), 110 mm (L)
|
Handlebars |
GravelBar - diam 31.8 mm / width 400 mm (S), 420 mm (M), 440 mm (L)
|
Bar tape |
KLS bar tape
|
Headset |
FSA 1.5 semi-integrated
|
Bottom bracket |
SHIMANO Press-Fit BB-RS500-PB
|
Thru axle |
front Mr.control 12x118 mm / rear NOVATEC 12x172 mm
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 1x11 |
Groupset | Shimano GRX |
Size | S, M, L |
Colour | black |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 224206 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews