Kellys Phanatic 80 28 bike, sand
Kellys Phanatic 80 28 bike
Suitable not only for commuting, but also for occasional trips outside the city of a sports/recreational spirit. Enjoy cycle paths and paved roads during the weekend. If you want to ride frequently, you will need to do more fine-tuning.
Frame |
KELLYS Crossforce Lite - tapered HT, internal routing, integrated kickstand mount
|
Fork |
SR SUNTOUR NCX-D Air RL DS, 63 mm, air / Remote Speed Lockout
|
Shifting |
SHIMANO Cues SL-U6000-11R Rapidfire Plus
|
Derailleur |
SHIMANO Cues U6020-11 (direct mount)
|
Derailleur |
SHIMANO Cues U8010-L (34.9 mm)
|
Cassette |
SHIMANO Linkglide CS-LG400-11 (11-45T)
|
Chain |
SHIMANO Linkglide CN-LG500 (114 articles)
|
Cranks |
SHIMANO Cues U6010-2 Hollowtech II (46x32T) - length 170 mm (S), 175 mm (M - L)
|
Brakes |
Shimano MT500 hydraulic disc
|
Brake levers |
Shimano BL-MT501
|
Brake discs |
front 160 mm / rear 160 mm
|
Rims |
KLS Draft Disc 622x21 (32 holes / riveted)
|
Hubs |
SHIMANO TX505 Disc Center Lock (32 holes)
|
Spokes |
stainless steel black
|
Tires |
SCHWALBE CX Comp 40-622 (700x38C) K-Guard, ReflectiveLine
|
Seat post |
KLS Active - diam 30.9 mm / length 350 mm (S), 400 mm (M - L)
|
Saddle |
KLS
|
Stem |
KLS Advanced - diam 28.6 mm / bar bore 31.8 mm / 7° / length 90 mm
|
Handlebars |
KLS Advanced FlatBar - diam 31.8 mm / width 640 mm (S - M), 660 mm (L)
|
Grips |
KLS Token 2Density
|
Headset |
semi-integrated
|
Bottom bracket |
SHIMANO BB-MT501
|
Pedals |
ALLOY
|
Sex | Men, Unisex |
Model year | 2024 |
Gears | 2x11 |
Groupset | Other |
Colour | sand |
Material | aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 63 mm |
product ID | 297112 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews