Superior XR 9.9 GR 28 bike, matte carbon/gloss red
Superior XR 9.9 GR 28 bike
Especially for riders who seek low weight, have high competitive and adventurous ambitions, and also those who are looking only for the best. The installed components come from the top manufacturers' sets, often complemented by carbon components. Regular professional service is necessary for proper functionality.
Frame |
SU-51-01, Carbon XR Race High Modulus, Road Advanced Geometry, Disc Brake Flat Mount, BB86.5, SH dropout, Thru Axle 142x12 mm, Inner cable routing, Di2 compatible, mudguards ready.
|
Fork |
XR Hi Modulus Carbon Fork
|
Shifting |
SRAM RED AXS, electronic shifter
|
Derailleur |
SRAM RED XPLR AXS, 13 speed
|
Cassette |
SRAM RED XPLR XG-1391, 13-speed, 10-46T
|
Chain |
SRAM RED, Flattop 12s/13s, 120 Link
|
Cranks |
SRAM RED XPLR, DUB WIDE, 44T
|
Brakes |
SRAM RED AXS, hydraulic disc brake
|
Brake discs |
SRAM Paceline X, 160mm/140mm
|
Wheels |
DT Swiss GRC 1600, Carbon, CL, 12x100 mm, Tubeless Ready/DT Swiss GRC 1600, Carbon, CL, 12x142 mm, XDR, Tubeless Ready
|
Tires |
Schwalbe G-One Allround, RaceGuard, TL-Easy, 40-622, ADDIX
|
Seat post |
ONE Aero Carbon
|
Saddle |
Fizi:k Vento Argo R5, Alloy
|
Handlebars |
ONE Carbon Integrated Cockpit ICR
|
Bar tape |
ONE Handlebar Tape
|
Headset |
ACROS AIX-525R3S, ICR, OD56, IS52/28.6 - 40IPS
|
Bottom bracket |
SRAM DUB ROAD WIDE, PressFit, shell 41x86.5 mm
|
Seat clamp |
Frame Integrated Clamp
|
Sex | Men, Unisex |
Model year | 2025 |
Gears | 1x13 |
Groupset | SRAM Red |
Colour | matte carbon/gloss red |
Material | carbon fiber |
Wheel material | Carbon |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 310694 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews