Mongoose Guide Sport, model 2020
Fork: Mongoose, 700C, aluminum steerer, 12 mm x 100 mm, QR
Cranks: Samox TAM31-232, aluminum, 46 / 30T
Gear: Shimano Sora ST-R3000, 2 x 9
Cassette: Sunrace, 9-speed, 11-34T
Chain: KMC Z99
Derailleur: Shimano Sora FD-R3000, band clamp
Derailleur: Shimano Sora RD-R3000
Rims: WTB ST-19, aluminum double wall, 19 mm ID, 32H, tubeless compatible,
Hubs: Xposure, aluminum, ball bearing, 9 mm x 100 mm, 32H, 6-boltXposure, aluminum, ball bearing, 9 mm x 135 mm, 32H, 6-bolt
Pedals: Mongoose, nylon
Brakes: Promax DSK-330 flat mount, mechanical, aluminum, 160 mm rotor
Stem: Xposure DieCast, Threadless, 90 mm / 100 mm, 7 °, 31.8 mm clamp
Head composition: Threadless, ZS44 / ZS56, retainer bearing
Handlebars :: Xposure, aluminum, 450 mm - 510 mm width, 31.8 mm clamp
Tip: 14G, stainless steel
Tires: Kenda Small Block, 700 x 47c, wire bead
Saddle: Mongoose adventure, steel rails
Seatpost : Xposure, aluminum, 350 mm, zero offset, 31.6 mm
Accessories: frame bag
Model year | 2020 |
Gears | 2x9 |
Groupset | Shimano Sora |
Material | aluminium |
Brakes | Mechanical disc brakes |
product ID | 101736 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews