Mongoose Guide Sport bicycle, yellow
Mongoose Guide Sport bike
Frame |
Tectonic T2, aluminum, 700c adventure geometry, internal cable routing, 9 mm x 142 mm dropout, replaceable hanger, tapered headtube
|
Fork |
Mongoose, 700c, aluminium steerer, 12 mm x 100 mm, QR
|
Shifting |
Shimano Sora ST-R3000, 2 x 9
|
Derailleur |
Shimano Sora RD-R3000
|
Derailleur |
Shimano Sora FD-R3000, band clamp
|
Cassette |
Sunrace, 9-speed, 11-34T
|
Chain |
Chain KMC Z99
|
Cranks |
Samox TAM31-232, aluminium, 46/30T
|
Brakes |
Promax DSK-330 flat mount, mechanical, aluminium, 160 mm rotor
|
Rims |
WTB ST-19, aluminium double wall, 19 mm ID, 32H, tubeless compatible
|
Front hub |
Xposure, aluminium, ball bearing, 9 mm x 100 mm, 32H, 6-bolt
|
Rear hub |
Xposure, aluminium, ball bearing, 9 mm x 135 mm, 32H, 6-bolt
|
Spokes |
Spokes 14G, stainless steel
|
Tires |
Kenda Small Block, 700 x 47c, wire bead
|
Seat post |
Xposure, aluminium, 350 mm, zero offset, 31.6 mm
|
Saddle |
Mongoose adventure, steel rails
|
Stem |
Xposure diecast, threadless, 90 mm/100 mm, 7°, 31.8 mm clamp
|
Handlebars |
Xposure, aluminium, 450 mm - 510 mm width, 31.8 mm clamp
|
Grips |
Xposure, non-slip tape
|
Headset |
Threadless, ZS44/ZS56, retainer bearing
|
Bottom bracket |
Samox, external, 3-piece, threaded 68 mm shell
|
Pedals |
Mongoose, nylon
|
Extra |
Frame bag
|
Model year | 2021 |
Gears | 2x9 |
Groupset | Other |
Material | aluminium |
Wheel material | Aluminium |
Brakes | Mechanical disc brakes |
product ID | 140989 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
