Marin Gestalt 2.5 bicycle, black/red
Marin Gestalt 2.5 bicycle
Frame |
Series 3 Beyond Road, 6061 Aluminum, Tapered Head Tube, Relieved BB, Internal Cable Routing, Mudguard and Rack Mounts, Flat Mount Disc, 142x12 mm Thru-Axle
|
Fork |
Marin Full Carbon w/ Tapered Steerer, 12 mm Thru-Axle, Flat-Mount Disc, Fender Eyelets
|
Front derailleur |
Shimano Tiagra
|
Rear derailleur |
Shimano Tiagra 10-Speed
|
Cassette |
Shimano Tiagra HG-500, 11-34T
|
Chain |
KMC X10
|
Cranks |
FSA Gossamer, MegaExo Spindle, 50/34T
|
Front brake |
Shimano Tiagra Hydraulic, 160 mm Rotor
|
Rear brake |
Shimano Tiagra Hydraulic, 160 mm Rotor
|
Brake levers |
Shimano w/ Integrated Shifters
|
Rims |
Marin Aluminum Double Wall, 19 mm Inner, 24 mm Tall, Disc Specific, Tubeless Compatible
|
Front hub |
Forged Aluminum Alloy, Disc, 32H
|
Rear hub |
Forged Aluminum Alloy, Disc, 32H
|
Spokes |
14 g Black Stainless Steel
|
Tires |
Schwalbe, G-One, 700Cx30 mm
|
Seat post |
Marin Alloy, 27.2 mm
|
Saddle |
Marin Beyond Road Concept
|
Stem |
Marine 3D Forged Alloy
|
Handlebars |
Marin Butted Alloy, Compact 12º Flared Drop
|
Bar tape |
Marin Perforated Tape
|
Headset |
FSA No 42ACB, 1 1/8" x 1 1/2"
|
Bottom bracket |
FSA MegaExo Threaded
|
Pedals |
Commute Platform
|
Shift levers |
Shimano Tiagra 2x10-Speed
|
Model year | 2022 |
Gears | 2x10 |
Groupset | Other |
Material | aluminium |
Wheel material | Aluminium |
Brakes | Hydraulic disc brakes |
product ID | 144927 |
MTB
Size | S | M | L | XL |
---|---|---|---|---|
Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
---|---|---|---|---|---|---|
Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
