Marin Four Corners 1 27.5 bike, blue
Choose personal collection at the store and decide on the spot.
MARIN Four Corners 1 27.5 bicycle
Size S has 27.5" wheels. Sizes M, L and XL have 28" (700C) wheels.Suitable not only for commuting to work, but also for weekend trips outside the city. Ride on cycle paths, paved and gravel roads and during weekend activities. If you ride more frequently, expect to do the necessary fine-tuning more regularly.
Frame |
Series 1 CrMo, Size-Specific Wheels (XS, S = 650B (27.5"), M, L, XL = 700C (28")), Biometric Geometry, Fender and Rack Mounts, Disc Mount
|
Fork |
Series 1 CrMo, Fender, Rack, and Bottle Cage Eyelets, IS Disc Mount
|
Shifting |
Shimano Sora/Dual Control 3x9
|
Derailleur |
Shimano Sora 9-Speed
|
Derailleur |
Shimano Sora
|
Cassette |
Shimano HG200 9-Speed, 11-34T
|
Chain |
KMC X9
|
Cranks |
Shimano Sora Hollowtech II, 50/39/30T
|
Brakes |
Tektro Spyre-C Road Mechanical Disc, 160 mm Rotor
|
Rims |
Marin Aluminum, Double Wall, Disc Specific
|
Hubs |
Forged Aluminum Alloy, Disc, 32H
|
Spokes |
14g Black Stainless Steel
|
Tires |
Vee Tire Co., GPVee, 650 x 40C
|
Seat post |
Marin Alloy, 27.2 mm
|
Saddle |
Marin MTB
|
Stem |
Marine 3D Forged Alloy
|
Handlebars |
Marin Butted Alloy, Compact 16º Flared Drop
|
Grips |
Marin Comfort Bar Tape, Shock Absorbing Gel Pads
|
Headset |
FSA No.8D, Sealed Cartridge Bearings
|
Bottom bracket |
Shimano
|
Pedals |
Trekking Platform
|
Sex | Men, Unisex |
Model year | 2024 |
Gears | 3x9 |
Groupset | Shimano Sora |
Size | S |
Colour | blue |
Material | steel |
Wheel material | Aluminium |
Wheel diameter | 27.5" |
Brakes | Mechanical disc brakes |
Fork | Rigid |
product ID | 271341 |
MTB
Size | S | M | L | XL |
---|---|---|---|---|
Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
---|---|---|---|---|---|---|
Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews