Lapierre Crosshill 3.0 28 bike, brown
Lapierre Crosshill 3.0 28 bike
Suitable not only for commuting to work, but also for weekend trips outside the city. Ride on cycle paths, paved and gravel roads and during weekend activities. If you ride more frequently, expect to do the necessary fine-tuning more regularly.
Frame |
Crosshill gravel Supreme 4 alloy internal cable routing
|
Fork |
Lapierre carbon blades, alloy steerer, 12 mm thru axle
|
Shifting |
Shimano Tiagra ST-4720 2x10s
|
Derailleur |
Shimano Tiagra FD-R4700
|
Derailleur |
Shimano Tiagra RD-R4700 GS 10s
|
Cassette |
Sunrace CSMS0 11-34T 10s
|
Chain |
KMC X10 silver/grey 1/2"x11/128" with CL566R link
|
Cranks |
FSA Omega Adventure MegaExo 46-30T, 170 mm (XS/S), 172.5 mm (M), 175 mm (L/XL)
|
Brakes |
Shimano Tiagra hydraulic brakes flat mount
|
Rims |
WTB ST i23 TCS 2.0 32H 700c 21-622
|
Front hub |
Lapierre, Center Lock 32H 12 mm E-thru axle
|
Rear hub |
Lapierre, Center Lock 32H 12 mm E-thru axle
|
Tires |
WTB Riddler 700x37c, Tan wall, Wire bead
|
Seat post |
Lapierre alloy, Ø: 27.2 mm, L: 350 mm, O/S: 12 mm
|
Saddle |
Selle Royal Vivo co-branded saddle
|
Stem |
Lapierre alloy, 6°, Ø: 31.8 mm, L: 90 mm (XS/S), 100 mm (M), 110 mm (L), 120 mm (XL)
|
Handlebars |
Lapierre alloy gravel bar, Width: 420 mm (XS/S), 440 mm (M), 460 mm (L/XL), Flare: 16°
|
Bar tape |
Lapierre elastomer tape black, shock proof, 3mm thick
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 2x10 |
Groupset | Shimano Tiagra |
Size | XS, S, M, L, XL |
Colour | brown |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 228336 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews