Kellys Soot 50, model 2020
Fork: KELLYS Carbon Disc - 1.5 tapered steerer, flat mount disc brake, 12x100mm thru axle
Head composition: FSA 1.5 semi-integrated
Middle composition: SHIMANO BB-RS500
Cranks: SHIMANO GRX (020) RX600-11 (46x30T) - length 172.5mm (S - M), 175mm (L)
Gear: SHIMANO GRX (020) ST-RX600
Derailleur: SHIMANO GRX (020) RX810 (braze on)
Derailleur: SHIMANO GRX (020) RX810 (direct mount)
Number of gears: 2x11
Cassette: SHIMANO CS-HG700-11 (11-34T)
Chain: KMC X11 EL (110 articles)
Brakes: SHIMANO GRX (020) RX400 Hydraulic Disc
Wheels: front 160mm / rear 160mm
Brake levers: SHIMANO GRX (020) ST-RX600
Hubs: NOVATEC Disc (32 holes)
Fixed axle: front Mr.control 12x100mm / rear NOVATEC 12x142mm
Rims: KELLYS Grind Disc 622x17 (32 holes / riveted)
Tip: stainless steel black
Tires: SCHWALBE Smart Sam Performance 42-622 (700x40C) ADDIX
Stem: KLS Active Road - diam 28.6mm / bar bore 31.8mm / 6 ° / length 90mm (S), 100mm (M), 110mm (L)
Handlebars: GravelBar - diam 31.8mm / width 400mm (S), 420mm (M), 440mm (L)
Grips: KLS bar tape
Seatpost: KLS Active Road - diam 30.9mm / length 350mm (S - M), 400mm (L)
Saddle: KLS SlipStream cr-mo
Weight: 10.84 kg (size M)
Model year | 2020 |
Gears | 2x11 |
Groupset | Shimano GRX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 89458 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
