Kellys SOOT 30 bike, green
Choose personal collection at the store and decide on the spot.
Kellys SOOT 30 bike
Basic model for a casual user who is looking for an alternative means of transport to get from place A to place B at an affordable price.
Frame |
KELLYS Gravel Concept - Aluminium alloy Disc, flat mount, tapered HT, internal routing, 12x142 mm thru axle
|
Fork |
KELLYS Carbon Disc - 1.5 tapered steerer, flat mount disc brake, 12x100 mm thru axle
|
Shifting |
Shimano Claris ST-R2000
|
Derailleur |
SHIMANO Claris R2000 (direct mount)
|
Derailleur |
SHIMANO Claris R2000 (for welding)
|
Cassette |
SHIMANO CS-HG50-8 (11-32T)
|
Chain |
KMC Z8 (112 articles)
|
Cranks |
SHIMANO Claris R2000 (50x43T) - length 172.5 mm (S - M), 175 mm (L - XL)
|
Brakes |
TEKTRO Spyre Mechanical Disc
|
Brake levers |
Shimano Claris ST-R2000
|
Brake discs |
front 160 mm / rear 160 mm
|
Rims |
KELLYS Grind Disc 622x17 (32 holes / riveted)
|
Hubs |
NOVATEC Disc (32 holes)
|
Spokes |
stainless steel black
|
Tires |
SCHWALBE Smart Sam Performance 42-622 (700x40C) ADDIX
|
Seat post |
KLS Active Road - diam 30.9 mm / length 350 mm (S - M), 400 mm (L), 460 mm (XL)
|
Saddle |
KLS SlipStream cr-mo rail
|
Stem |
KLS Active Road - diam 28.6 mm / bar bore 31.8 mm / 6° / length 90 mm (S), 100 mm (M), 110 mm (L)
|
Handlebars |
GravelBar - diam 31.8 mm / width 400 mm (S), 420 mm (M), 440 mm (L)
|
Bar tape |
KLS bar tape
|
Headset |
FSA 1.5 semi-integrated
|
Bottom bracket |
SHIMANO BB-RS500
|
Thru axle |
front Mr.control 12x118 mm / rear NOVATEC 12x162 mm
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 2x8 |
Groupset | Shimano Claris |
Weight | 10.84 kg (M) |
Colour | green |
Material | aluminium |
Wheel material | Aluminium |
Brakes | Mechanical disc brakes |
Fork | Rigid |
product ID | 175295 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
