GT Grade CX Rival cyclocross bike
Fork: GT Carbon with tapered 1 1/8 to 1 1/4 Threadless Carbon steerer, disc specific, 15mm thru axle
Cranks: SRAM S350-1, 40T
Center composition: SRAM GXP
Shifters: SRAM Rival, 11-speed
Cassette: SRAM 11-speed 11-32
Chain: KMC X11
Derailleur: SRAM Rival
Rims: Alex ATD470 disc specific road 22mm tall profile
Hubs: Formula 6 bolt disc sealed (F) 32h, (R) cassette 32h
Handlebars: New GT DropTune Super Light double butted 6061 alloy bar
Pedals: Low Profile Nylon w/ Toe Clips
Brakes: (F & R) SRAM Rival, w/ Centerline 160mm rotors
Stem: GT Design 3D forged 6061, 4 bolt face plate 7 ° Rise, 31.8mm Clamp
Head composition: Integrated TH sealed bearing
Brake levers: SRAM Rival, 11-speed
Tires: (F & R) Clement 10039 700 x 33 60tpi, Folding
Saddle: Fizik Monte mg
Seatpost: One Bolt Aluminun
Sizes: 51, 53, 55, 56, 58, 60
Color: neon red / black
Model year | 2017 |
Gears | 1x11 |
Groupset | SRAM GX, SRAM Rival |
Material | aluminium |
Wheel material | Aluminium |
Brakes | Mechanical disc brakes |
Fork | Rigid |
product ID | 33911 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews