Giant Revolt X Advanced Pro 1 28 bike, cordovan/copper coin
Giant Revolt X Advanced Pro 1 28 bike
Frame |
Advanced-Grade Composite, 12x142 mm thru-axle, disc, flip chip dropout
|
Fork |
RockShox Rudy Ultimate XPLR, 40 mm, Charger Race Day damper 12x100 mm thru-axle
|
Shifting |
SRAM Rival eTap AXS, 1x12
|
Derailleur |
SRAM GX Eagle AXS
|
Cassette |
SRAM XG-1275, 12-speed, 10-52T
|
Chain |
SRAM GX Eagle
|
Cranks |
SRAM Rival D1 DUB, 40T XS: 170 mm, S: 170 mm, M: 172.5 mm, M/L: 172.5 mm, L: 175 mm, XL: 175 mm
|
Brakes |
SRAM Rival eTap AXS hydraulic, SRAM PaceLine rotors [F] 160 mm, [R] 160 mm
|
Brake levers |
SRAM Rival eTap AXS hydraulic
|
Rims |
Giant CXR X1 Carbon Disc WheelSystem, [F] 25.8 mm, [R] 25.8 mm
|
Hubs |
[F] Giant AR alloy, CenterLock, 12 mm thru-axle
[R] Giant AR alloy, DT350 36t ratchet system, CenterLock, 12 mm thru-axle |
Spokes |
Sapim CX-Ray
|
Tires |
Giant CrossCut Grip 1, 700x45c, tubeless
|
Seat post |
Postmodern, dropper, 30.9 mm with 25 mm of suspension XS: 365 mm/75 mm drop S: 415 mm/100 mm drop M: 415 mm/100 mm drop M/L: 415 mm/100 mm drop L: 415 mm/ 100 mm drop XL: 415 mm/100 mm drop
|
Saddle |
Giant Approach SL
|
Stem |
Giant Contact, 8-degree XS: 50 mm, S: 60 mm, M: 70 mm, M/L, L, XL: 80 mm
|
Handlebars |
Giant Contact SL XR D-Fuse, 16-degree flare XS: 44 cm, S: 44 cm, M: 46 cm, M/L: 46 cm, L: 48 cm, XL: 48 cm
|
Bar tape |
Stratus Lite 3.0
|
Bottom bracket |
SRAM DUB, press fit
|
Additional info |
tubeless prepared, 53 mm max tire size in "long" flip chip position, 45 mm max tire size in "short" flip chip position
|
Model year | 2023 |
Gears | 1x12 |
Groupset | Other |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Air |
product ID | 228681 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews