Giant Revolt Advanced 3 28 bike, panther
Choose personal collection at the store and decide on the spot.
Giant Revolt Advanced 3 28 bike
Suitable for enthusiasts who like to discover their neighborhood and more distant locations from the seat of their bicycle. The components have sufficient durability and can handle regular rides and training on light terrain, paved and unpaved roads.
Frame |
Advanced-grade composite, 12x142 mm thru-axle, disc, flip chip dropout, down tube storage
|
Fork |
Advanced-Grade Composite, full-composite OverDrive steerer, 12 mm thru-axle, disc
|
Shifting |
Shimano GRX RX-400, 2x10
|
Derailleur |
Shimano GRX-RX400
|
Derailleur |
Shimano GRX-RX400
|
Cassette |
Shimano Tiagra, 11-34T
|
Chain |
KMC X10-1
|
Cranks |
FSA Omega, 30/46T XS, S: 170 mm, M, M/L: 172.5 mm, L, XL: 175 mm
|
Brakes |
Shimano GRX RX-400 hydraulic, Giant MPH rotors [F] 160 mm, [R] 160 mm
|
Brake levers |
Shimano GRX RX-400 hydraulic
|
Rims |
Giant P-X2 Disc wheelset, alloy
|
Hubs |
Giant alloy, 12 mm thru-axle
|
Spokes |
Sapim
|
Tires |
Giant Crosscut Grip TR, 700x40c, tubeless
|
Seat post |
Giant D-Fuse, composite, 14 mm offset
|
Saddle |
Giant Grit
|
Stem |
Giant Contact AeroLight, -10 degree XS: 50 mm, S: 60 mm, M: 70 mm, M/L, L: 80 mm, XL: 90 mm
|
Handlebars |
Giant Contact XR D-Fuse, 31.8 mm, XS, S: 42 cm, M, M/L: 44 cm, L, XL: 46 cm
|
Bar tape |
Stratus Lite 3.0
|
Bottom bracket |
FSA BB-AL86, press fit
|
Accessories |
tubeless prepared, in-frame storage bag
|
Sex | Men, Unisex |
Model year | 2025 |
Gears | 2x10 |
Groupset | Shimano GRX, Shimano Tiagra |
Colour | black |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 700C (28") |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
Max tire width | 53 mm in "long flip chip" position, 42 mm in "short flip chip" position |
product ID | 296918 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews