Giant Revolt Advanced 2 gravel bike
Gravel bike, lightweight carbon frame, Gaint hydraulic disc brakes, Shimano 105 2x11 gears
The basis of the GIANT Revolt Advanced 2 bike is a super light, highly rigid and at the same time very comfortable Advanced Composite carbon frame with modern gravel geometry. This mainly consists in a significant slope - compared to a cyclocross bike, the Revolt Advanced does not need to have a straight upper frame tube for better carrying on the shoulder, because you will not carry this bike on your shoulder and you will overcome all off-road obstacles nicely in the saddle.
There's a carbon D-Fuse seatpost and plenty of low-slung seatstays for added comfort. Contact XR D-Fuse handlebars are also made using the same technology as the seat post, which springs slightly under load - again for greater comfort.
For the "clean" look of the frame, an integrated saddle clamp must not be missing, and the internal bowden cable is also a matter of course.
You can rely on Giant Conduct SL semi-hydraulic brakes, which will give your ride confidence on any descent, regardless of the weather conditions. GIANT Revolt Advanced 2 is equipped with a complete set of quality and proven Shimano 105 components with 2x11 speeds.
Braided wheels made directly by Giant spin on hubs with 12mm solid axles. The wheels are shod in Giant CrossCut Gravel 1 tubeless tires of size 700x40c (there is room for up to 45c in the frame). There is also X-Defender protection for the lower frame tube, holes for up to three bottle baskets, and fans of extra long trips, for example multi-day ones, will definitely appreciate the possibility to mount a front and rear rack.
Model year | 2019 |
Gears | 2x11 |
Groupset | Shimano 105 |
Material | carbon fiber |
Wheel material | Carbon |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 77259 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews