Giant Revolt Advanced 2 28 bike, carbon smoke
Giant Revolt Advanced 2 28 bike
Serious sports equipment, suitable for enthusiasts who like to diversify their daily dose of kilometers with a shortcut through forest and country roads, and are not afraid of a multi-day adventure. You can count on high durability and 100% reliability.
Frame |
Advanced-grade composite, 12x142 mm thru-axle, disc, flip chip dropout, down tube storage
|
Fork |
Advanced-Grade Composite, full-composite OverDrive steerer, 12 mm thru-axle, disc
|
Shifting |
Shimano GRX RX-610, 2x12
|
Derailleur |
Shimano GRX RX-820
|
Derailleur |
Shimano GRX RX-820
|
Cassette |
Shimano CS-HG710, 12-speed, 11x36T
|
Chain |
KMC X12L-1
|
Cranks |
FSA Omega Modular AGX+, 32/48 XS: 170 mm, S: 170 mm, M: 172.5 mm, M/L: 172.5 mm, L: 175 mm, XL: 175 mm
|
Brakes |
Shimano GRX RX-410 hydraulic, Giant MPH rotors [F] 160 mm, [R] 160 mm
|
Brake levers |
Shimano GRX RX-610 hydraulic
|
Rims |
Giant P-X2 Disc wheelset, alloy
|
Hubs |
Giant alloy, 12 mm thru-axle
|
Spokes |
Sapim
|
Tires |
Giant Crosscut Grip TR, 700x40c, tubeless
|
Seat post |
Giant D-Fuse, composite, 14 mm offset
|
Saddle |
Giant Grit
|
Stem |
Giant Contact AeroLight, -10 degree XS: 50 mm, S: 60 mm, M: 70 mm, M/L: 80 mm, L: 80 mm, XL: 90 mm
|
Handlebars |
Giant Contact XR D-Fuse, 31.8 mm XS: 42 cm, S: 42 cm, M: 44 cm, M/L: 44 cm, L: 46 cm, XL: 46 cm
|
Bar tape |
Stratus Lite 3.0
|
Bottom bracket |
FSA BB-AL86, press fit
|
Accessories |
tubeless prepared, 53 mm max tire size in "long" flip chip position, 45 mm max tire size in "short" flip chip position, in-frame storage bag
|
Sex | Men, Unisex |
Model year | 2025 |
Gears | 2x12 |
Groupset | Shimano GRX |
Colour | carbon smoke |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 293743 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews