Fuji TOURING Disc LTD, model 2021, gray
Fork: Chromoly with 1 1/8 steerer, flat mount disc, low-rider water bottle and rack mounts
Cranks: FSA Tempo, 50/39/30T
Central composition: VP-BC73C cartridge-style
Pedals: Alloy platform
Derailleur: Shimano Sora, 28.6mm clamp
Derailleur: Shimano Sora
Shifting: Shimano Sora
Cassette: Shimano HG400, 11-34T, 9-speed
Chain: KMC X9
Wheels: Alex double wall, 36H, front: Shimano Hub Dynamo, Rear: Shimano Deore T-675 centerlock disc hub
Tires: Vittoria Randonneur Tech, 42-622, 33tpi
Brakes: Shimano Sora
Brake levers: FSA, 1 1/8, sealed
Head composition: Oval Concepts 310 Ergo, 6061 alloy, 31.8mm clamp, 133mm drop, 4 degree sweep
Handlebars: 3D-forged 6061, +/-6 degrees
Stem: Oval Concepts 300 bar tape, suede
Grips: Oval Concepts 344, steel rail
Seat: 6061 alloy, 27.2mm diameter
Seat post: 13.46 kg
Weight: Polycarbonate full coverage, stainless hardware
Display: Fuji Alloy with Strap
Model year | 2021 |
Gears | 3x9 |
Groupset | Shimano Deore, Shimano Sora |
Material | steel |
Brakes | Mechanical disc brakes |
product ID | 118854 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews