Fuji JARI CARBON 1.3, model 2021, black
Fork: C10 carbon monocoque, tapered carbon steerer, 100x12mm thru-axle
Cranks: FSA Omega, 40T
Middle composition: FSA, threaded
Derailleur: Shimano GRX RX812
Gear: Shimano ST-RX600 GRX Dual Control, 1 x 11-speed
Cassette: Shimano SLX, 11-42T
Chain: KMC X11
Wheels: Alex Boondocks GX5, alloy tubeless compatible rims, 32H, 14 / 15G spokes
Tires: WTB Resolute TCS Tubeless Light, 42-622, folding
Brakes: Shimano GRX, hydraulic disc
Brake levers: FSA, 1 1/8 upper - 1 1/2 lower, integrated
Head composition: Oval Concepts 325, 6061 alloy, 31.8mm clamp, 125mm drop, 25 degree flare, 4 degree sweep
Handlebars: Oval Concepts 313, 3D-forged 6061, +/- 6 degree
Stem: Anti-slip silicone
Grips: Oval Concepts X38 with pressure relief zone, cromo rails
Saddle: Oval Concepts 300, alloy, 27.2mm
Seatpost: 9.7 kg
Model year | 2021 |
Gears | 1x11 |
Groupset | Shimano SLX, Shimano GRX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 118845 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews