Fuji JARI CARBON 1.1, model 2021, red
Fork: C10 carbon monocoque, tapered carbon steerer, 100x12mm thru-axle
Cranks: FSA Gossamer Pro, 48/32T
Center composition: FSA, threaded
Derailleur: Shimano GRX RX810
Derailleur: Shimano GRX RX810
Shifting: Shimano ST-RX810 GRX Dual Control, 2 x 11-speed
Cassette: Shimano 105, 11-34T
Chain: KMC X11
Wheels: DT Swiss G1800 Spline 25, 32H, DT Aero Comp spokes, tubeless compatible
Tires: WTB Resolute TCS Tubeless Light, 42-622, folding, tubeless compatible
Brakes: Shimano GRX, hydraulic disc
Brake levers: FSA, 1 1/8 upper - 1 1/2 lower, integrated
Headstock: Oval Concepts 325, 6061 alloy, 31.8mm clamp, 125mm drop, 25 degree flare, 4 degree sweep
Handlebars: Oval Concepts 707, 3D-forged 6061, 7 degree
Stem: Anti-slip silicone
Grips: Oval Concepts X38 with pressure relief zone, chrome rails
Saddle: Oval Concepts 905, carbon, 27.2mm
Seat post: 9.6 kg
Model year | 2021 |
Gears | 2x11 |
Groupset | Shimano GRX, Shimano 105 |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 118844 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews