Fuji Altamira CX 1.1 Graphite gray, model 2019
Fork: FC-330 Cross carbon monocoque, 12mm thru-axle w / flat-mount disc system, tapered steerer
Cranks: Quark Prime Carbon, 42T, Power ready
Middle composition: SRAM, PF30
Derailleur: SRAM Force 1
Gear: SRAM Force 1 DoubleTap w / Hydraulic reservior, 11-speed
Cassette: SRAM PG-1170, 11-32T
Chain: KMC X11SL Ni-Ti Plated
Wheels: Oval Concepts 723 Disc, Centerlock hubs, 100x12mm & 142x12mm thru axles, 700c 24 / 28H tubeless compatible rims
Tires: Vittoria Terreno Mix, 700 x 33, 120tpi, folding, TNT tubeless ready
Brakes: SRAM Force 1 Hydraulic, 140/140 rotors
Brake levers: SRAM Force 1 DoubleTap w / Hydraulic reservior
Head composition: FSA, 1 1/8 upper - 1 1/2 lower, integrated w / carbon top cover
Handlebars: Oval Concepts 910 Ergo, carbon, 31.8mm clamp, 133mm drop, 4 degree sweep
Predstavec: Oval Concepts 707, 3D-forged 6061 stem points, +/- 7 degree
Saddle: Oval Concepts X38c with pressure relief zone, carbon rail
Seatpost: Oval Concepts 950, carbon & alloy, 27.2mm diameter
Weight: 7.9 kg / 17.42 lbs
Model year | 2019 |
Gears | 1x11 |
Groupset | SRAM Force |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 78094 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews