FELT F3X black, model 2019
Fork: Felt UHC Ultimate + TeXtreme carbon
Shifting: Sram Rival
Derailleur: Sram Force CX1
Cassette: Sram, 11-36 teeth
Chain: Sram, 11 speeds
Cranks: Praxis Works Zayante, 40 teeth, (47cm - 165mm, 50cm - 170mm, 53cm - 172.5mm, 55/60cm - 175mm)
Headstock : FSA No.42, 1.125"-1.5"
Stem: Zipp Service Course, +/-6°, (47cm - 80mm, 50/53cm - 90mm, 55cm - 100mm, 57cm - 110mm, 60cm - 120mm)
Handlebars: New Zipp Service Course (47/50cm - 400mm, 53/55cm - 420mm, 57-60cm - 440mm)
Brakes: Sram Rival, hydraulic, 160/140mm
Brake levers: Sram Rival
Bullets: Devox RSL3D
Rims: Devox Variable Road Cx2.1
Spikes: steel
Tires: Schwalbe X-One, 700c x 33c
Seatpost: Service Course Blast Black, 330mm Seat: Prologo Scratch X8 T2.0
Weight: 8.3 kg
Gears | 1x11 |
Groupset | SRAM Force, SRAM Rival |
product ID | 77400 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews