CTM KOYUK 2.0 matt army / orange, model 2020
Fork: RCCFK G Carbon Fork
Gear: Shimano GRX / RX-400
Derailleur: Shimano GRX RX-400 10s.
Derailleur: Shimano GRX RX-400
Multi-wheel / cassette: Shimano CSHG500 / 10sp. 11-34
Converter: Shimano GRX RX-600 - 10s. (46-30T) (540-172.5mm, 560.580-175mm)
Brakes: Shimano GRX RX400
Rims: WTB ST i19 TCS 2.0 / 700c
Tires: WTB Riddler TCS 700x37c
Hubs: Novatec D981B-12 / D952SB-SL-X12
Oska: Shimano
Pedals: w / o
Chain: Shimano HG54
Stem: CTM TDS-RD701 80mm
Handlebars: CTM X-Race 440mm
Head composition: FSA Orbit C40, ACB
Saddle: WTB Volt
Seatpost: CTM SPDC1 350x27.2 mm
Number of speeds: 20 speed
Weight: 10.7 kg
Model year | 2020 |
Gears | 2x10 |
Groupset | Shimano GRX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 96096 |
Men
Size | S | M | L | XL |
---|---|---|---|---|
Height | do 160 cm | 160-175 cm | 175-185 cm | 185-205 cm |
Size | S | M | L |
---|---|---|---|
Height | do 155 cm | 155-175 cm | 170-190 cm |
Size | XS 520 mm | S 540 mm | M 560 mm | L 580 mm | XL 600 mm |
---|---|---|---|---|---|
Height | 160-170 cm | 165-175 cm | 175-185 cm | 185-190 cm | 190-200 cm |
Size | 12" | 16" | 20" | 24" | 26" S | 26" M |
---|---|---|---|---|---|---|
Height | 80-110 cm | 105-120 cm | 115-135 cm | 125-145 cm | 135-155 cm | 150-165 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews