Cannondale Topstone Carbon 6 bicycle, abyss
Fork: Full Carbon, 1-1/8" to 1.5" steerer, 55mm OutFront offset, flat mount disc, internal routing, 12x100 speed release thru axle
Cranks: Cannondale 1, BB30a w/ OPI SpideRing, 46/30
Shifters: Shimano GRX 400, 2x10-speed
Cassette: Shimano HG500, 11-36, 10-speed
Chain: KMC X10, 10-speed
Derailleur: Shimano GRX 400, braze-on
Derailleur: Shimano GRX 400, Shadow RD+
Rims: WTB ST i23 TCS, 28h, tubeless ready
Hubs: (F) Formula cartridge bearing, Centerlock, 12x100mm / (R) Formula cartridge bearing, Centerlock, 12x142mm
Brakes: Shimano GRX 400 hydraulic disc, 160/160mm RT64 rotors
Stem: Cannondale 3, 6061 Alloy, 31.8, 7°
Head composition: Integrated, 1.5" lower to 1-1/8" upper w/ reducer, 25mm Alloy top cap
Handlebars: Cannondale 3, butted 6061 alloy, 16 deg flare drop
Brake levers: Shimano GRX 400 hydraulic disc
Tip: Stainless Steel, 14g (Ai Offset Dish - Rear)
Tires: WTB Riddler TCS Light, 700 x 37c, tubeless ready
Saddle: Fizik Aliante Delta, S-alloy rails
Seatpost: Cannondale 3, 6061 alloy, 27.2 x 350mm
Color: Abyss
Extra: Cannondale Wheel Sensor
Model year | 2022 |
Gears | 2x10 |
Groupset | Shimano GRX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 169598 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
