Cannondale Super X Rival Disc cyclocross bike, model 2015
Frame- SuperX, BallisTec Carbon, SPEED SAVE, BB30
Fork - SuperX, BallisTec Carbon, 1-1/8" to 1-1/4" steerer
Rims - Maddux CX 2.0 Disc, 32-hole
Hubs- Formula CX20 front, CX 22 rear
String - DT Champion 1.8
Tires - Schwalbe Rapid Rob, 700x35c
Pedals- N/A
Cranks - FSA Gossamer Pro Cross, BB30, 46/36
Center composition - FSA BB30
Chain - SRAM PC-1130, 11-speed
Cassette - SRAM PC-1030, 11-28, 11-speed
Derailleur - SRAM Rival 22, braze-on
Derailleur - SRAM Rival 22
Shift levers - SRAM Rival 22 HRD
Handlebars - Cannondale C3 Compact, butted 6061 alloy
Grips - Cannondale Grip Bar Tape w/Gel, 3.5mm
Stem - Cannondale C3, 6061 Alloy, 31.8, 6 deg.
Head composition - SuperX, 1-1/4" lower bearing, 25mm carbon top cap
Brakes - SRAM Rival HRD hydraulic disc, 160/140mm
Brake levers - SRAM Rival HRD
Seat - Prologo Kappa Evo STN
Seatpost - Cannondale C3 Alloy, 27.2mmx300mm
Sizes - 54
Model year | 2015 |
Gears | 2x11 |
Groupset | SRAM Rival |
Material | carbon fiber |
product ID | 7369 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews