Cannondale Super X Apex 1 2019 cyclocross bike
Cyclocross bike, carbon frame Ballistec SAVE, Sram Apex 1, hydraulic disc brakes, CX 2.0 rims, Fabric saddle.
Frame: SuperX, Ballistec Carbon, SAVE, BB30-83 Ai, 12x142 thru-axle
Fork: SuperX, Ballistec Carbon, 1-1 / 8 "to 1.5" steerer, 12x100 mm thru-axle, 55 mm offset
Cranks: Cannondale Si w / OPI Spidering, X-Sync ®, 40T
Center composition: Cannondale Alloy PressFit30
Gear levers: SRAM Apex 1 HRD, 1x11
Cassette: SRAM PG-1130, 11-36, 11-speed
Chain: SRAM PC-1110, 11-speed
Derailleur: SRAM Apex 1, Long cage
Rims: CX 2.0, 28h front, 28h rear
Hubs: Formula RX-512 front, RX-142 rear
Brakes: SRAM Apex 1 HRD, 160/160 mm Centerline
Stem: Cannondale C3, 6061 Alloy, 31.8, 7 °
Head composition: SuperX, 1.5 "lower to 1 -1/8" upper w / reducer, 25 mm Alloy top cap
Handlebars: Cannondale C3, 6061 Alloy, Compact
Brake levers: SRAM Apex 1 HRD
Wires: Stainless Steel, 14g (Ai Offset Dish - rear)
Tires : white Toria Terreno Mix TNT, 700 x 33c, tubeless ready
Saddle: Fabric Scoop Shallow Elite, cro-mo rails
Seatpost: Cannondale C3, 6061 Alloy, 25.4 x 350 mm (46-56), 400 mm (58-61)
Weight: 7.4 kg (56cm)
Gears | 1x11 |
Groupset | SRAM Apex |
product ID | 75658 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews